Select Hinges SL57 HD 83″ Heavy Duty Bronze Full Surface Hinge
Fits narrow (7/8″) frame face. Tamper resistant, removable door leaf cover. 1/16″ door inset. Standard barrel nuts accommodate 1-3/8″ to 1-3/4″ doors. Long barrel nuts available for 2″ to 2-1/4″ doors.
All SL57 geared continuous hinges are BHMA Grade 1 certified.
Description
- Material: Extruded 6063 T6 aluminum alloy with self-lubricating polyester thrust bearings.
- Lengths:83″, 85″, 95″, and 120″ lengths standard for nominal door heights.
- Finish:All SL57 hinges are stocked clear and Dark Bronze anodized aluminum.
- Load Frequency Ratings:For 1-3/8″ – 1-3/4″ door standard; long barrel nuts available for 2″ – 2-1/4″ doors. 48″ max. door width in 16 gauge hollow metal (min.) or 1/8″ aluminum (min.).
- Standard Duty (SD)– Tested per BHMA standards for medium-frequency doors up to 200 lb. without frame or door reinforcement.
- Heavy Duty (HD) – Tested per BHMA standards. Up to 200 lb. doors (high-frequency) and up to 400 lb. doors (medium-frequency) without frame or door enforcement; up to 600 lb. doors (low-frequency) with the use of Rivnuts in the frame.
- BHMA Certification: SL57SD and SL57HD geared continuous hinges conform to BHMA Standard ANSI/BHMA A156.26-2006 Grade 1.
SELECT Advantages
- Pair-Matched Hinge Leaves
Manufactured together, machined together and anodized together, making SELECT hinges fit your doors better and last longer. An exclusive SELECT benefit. - Lifetime Lubrication
Eliminates the need for periodic maintenance. Quiet performance. Fights gear cap wear. An exclusive SELECT benefit. - Anodized After Machining
Delivers superior wear, durability and life. Inhibits corrosion. Few hinge makers follow SELECT’s lead in using this superior manufacturing process. - Meets Leed Requirements
Made from recycled aluminum. Reduces environmental impact and qualifies for LEED points. An exclusive SELECT benefit. - Patented 3-Hr. Fire Rating
Most SELECT hinges are fired rated for 90 minutes. 3-Hr. fire rating, optional at extra cost, approved for positive/negative pressure. No fire pins or studs required. Patented design innovation. An exclusive SELECT benefit. - Consistent Templating
Hole pattern is identical on both Standard and Heavy Duty models, so SELECT hinges line up precisely for easier and faster installation. An exclusive SELECT benefit. - Coated Fasteners
Provide additional corrosion protection with either self-drilling, threat-forming (SDTF) or threat-forming (TF) screws. An exclusive SELECT benefit.
Download
- Concealed Through-Wire
- Profile
- Specification sheet
Fire Rating
- 90-minute Fire Rating
- 3-hour Fire Rating
